Pax Audigy Software Suite Spring Edition 2009

Neshi · Oct 7, 2009, 08:11 PM

Can I just download it and run the installer, or do I have to manually uninstall everything (the suite and driver) first, and then install the new driver + this suite?

Robert McClelland · Oct 8, 2009, 02:25 AM

Yes it's always good to uninstalled currect driver but you can keep your software.

magwork · Oct 8, 2009, 01:36 PM

Hi, use your Pax pci audigy all os 1.2 driver in Win7 X64 an installed the software from Spring Suite.

Now i have grayed-out switches for Bass and Treble in Surroundmixer. And EAX sais it didn't find the supported audio device.

I own a Sb Audigy Gamer SB009.

What can I do?

Robert McClelland · Oct 8, 2009, 01:56 PM

Used driver cleaner uninstalled then run driver cleaner then run iobit software fix up reg and defrag reg and reinstalled the driver you may have to formated.

magwork · Oct 8, 2009, 02:08 PM

Sorry, don't take this personal. But i don't understand your instructions completely.

First I have to unistall Software and driver.
Then run a driver cleaner.
"Run iobit software"<- what is iobit software ??
The run regcleaner.
And at last install driver again.

Is this procedure correct.

Edit: I did do that procedure, I uninstalled drivers an software. Did run driver cleaner and "ccleaner" rebooted. Installed Software form Spring Suite, rebooted. And installed pax audigy 1.2 drivers.

But same results: Music ok, but in surround mixer greyed-out regulators for bass, treble, that u hear, and so on. Only master volume and CD volume is available. Eax console crashes as described earlier.

Paaki · Oct 8, 2009, 05:43 PM

Quote:

Originally Posted by Neshi

I get the message: the audio device supported by this application is not detected. The application will now exit.

This is with the EAX control and equalizer, the diagnostics tool fails it's tests too.. what to do?

Same with my Audigy 2 ZS Notebook and I've tried to install drivers from v1.20, spring edition pack, v6.60, official 2.18.

Robert, can you confirm is my device id supported:

PCI\VEN_1102&DEV_0008&SUBSYS_20011102&REV_00
PCI\VEN_1102&DEV_0008&SUBSYS_20011102
PCI\VEN_1102&DEV_0008&CC_040100
PCI\VEN_1102&DEV_0008&CC_0401

Device manager still says Creative audigy 2 zs (wdm), is this the problem with those few tools? I downloaded the pfmod.dll but where should I put it?

Master0fPuppets · Oct 12, 2009, 10:15 PM

I'm attempting to get my Audigy 2ZS working in Win 7 Ultimate, and not having fun... seems CMSS won't work at all - the EAX Console tanks out when I try to use it, and I've tried all different drivers (XP/Vista/Win7) and software packages (original/xp/vista). I'm going to attempt your driver and software packs, and I'll update here to let you know how it works on Windows 7 Ultimate. (Yes, it's the full release version, btw)

sda2 · Oct 22, 2009, 11:15 AM

Heyho, I just downloaded your Audigy All-OS Driver 1.2 and this Spring Edition.

I installed the driver for my Audigy 2 ZS and everything's fine now, awesome sound and my mic got fixed in Skype aswell.

Now, I wanted to have the Creative software suite like on my god old XP SP3 and I installed software from Spring Edition 2k9.

During the installation, no error occured and I was really happy everything seemed to be working, but EAX Console and this Equilizer still fail to start.

And Surroundmixer only shows Volume Control to me

No adjustable Bass and Treble. To change this, I must go into my Windows controlpanel for audio.

Here's a little screenshot:

Maybe you can help me to get those apps running on 7 64bit.

Thanks, sda2

Robert McClelland · Oct 23, 2009, 03:30 AM

hmm Did you do full driver cleaner? and run reg cleaner before you run the suite. Suite goes first then drivers second.

sda2 · Oct 23, 2009, 12:25 PM

Ahh I think thats the reason.. I first did the drivers then suite.

Thanks, I will give it a try

magwork · Oct 23, 2009, 01:39 PM

Hi,

i have exactly the same problem as sda2. I'm on Win7 x64 but with an "Audigy 1 Player" SB009.

I did a complete uninstall of Software and drivers. Did run two driver cleaners and "ccleaner" for software clean-up.

Then restarted win7 and installed software first. Afterwards I installed the All-OS 1.2 driver.

But I got the same problems again. In surroundmixer there is only mastervolume, volume and cd-audio, as shown in sda2's picture. And equalizer and EAX have the same error messages as shown in sda2's screenshot.

evrycard · Oct 24, 2009, 10:14 AM

I have the same problem as magwork and sad2.
Using: Audigy 4 Pro on windows 7 x86

On windows 7 x64, I have problem installing the application Spring edition. Below is the error:
"CTDVDA32.DLL This DLL can only be loaded in the native 32-but environnement"
then "RegSvr32 fails to register c:\windows\system32\CTDvda32.dll"

magwork · Oct 24, 2009, 10:50 AM

Quote:

Originally Posted by evrycard

On windows 7 x64, I have problem installing the application Spring edition. Below is the error:
"CTDVDA32.DLL This DLL can only be loaded in the native 32-but environnement"
then "RegSvr32 fails to register c:\windows\system32\CTDvda32.dll"

Yeah, the creative dvd player software can't be installed under x64 OS. You have to untick the dvd part in the install.

Aymen · Oct 24, 2009, 10:58 PM

Thank u so much ! u made my day !!

Robert McClelland · Oct 25, 2009, 12:55 AM

Ya dvd from creative doesn't work with 64 bit unless they updated at there web site. Don't worry I role new sets drivers with more updated tweak settings soon. It may have wait to Nov I'm still searching for good home to live in

magwork · Oct 26, 2009, 08:19 PM

Quote:

Originally Posted by magwork

Hi,

i have exactly the same problem as sda2. I'm on Win7 x64 but with an "Audigy 1 Player" SB009.

I did a complete uninstall of Software and drivers. Did run two driver cleaners and "ccleaner" for software clean-up.

Then restarted win7 and installed software first. Afterwards I installed the All-OS 1.2 driver.

But I got the same problems again. In surroundmixer there is only mastervolume, volume and cd-audio, as shown in sda2's picture. And equalizer and EAX have the same error messages as shown in sda2's screenshot.

Pushing it, hope there is a solution.

Robert McClelland · Oct 26, 2009, 09:33 PM

I release audigy set soon

.

boba23 · Oct 27, 2009, 01:26 PM

Hey Robert,

downloaded your software suite, I am on Win7 32bit with an Xtreme Music.
Should I install software only and then the latest driver? Or driver first, and then software?

thanks

boba

nofate · Dec 22, 2009, 06:06 AM

hi Rob..
I'm using Creative XFI Surround 5.1 usb,everything's okie except there's no DTS and Dolby Digital...On Audio Console panel there is not DTS/Dolby icon also...Could you please help me???What should i do?

I'm looking forward to hearing from you soon,

Thanks in advance,bro...

PS:I'm using Windows 7 Pro

Robert McClelland · Dec 22, 2009, 06:17 AM

Hi nofate could u repost in right therad rhanks I'd know about usb one but your welcome try my drivers out

nofate · Dec 22, 2009, 06:55 AM

Quote:

Originally Posted by Robert McClelland

Hi nofate could u repost in right therad rhanks I'd know about usb one but your welcome try my drivers out

Sorry Rob,coz i'm newbie in here..
Could you please give me the link to try your drivers out??i couldn't find the right threads...Sorry again,bro..

Thx,

Oct 7, 2009, 08:11 PM	#121
Neshi S.N.A.F.U. Join Date: Dec 2005 Location: Wellington, NZ Posts: 2,350 Rep Power: 94	Re: Pax Audigy Software Suite Spring Edition 2009 Can I just download it and run the installer, or do I have to manually uninstall everything (the suite and driver) first, and then install the new driver + this suite? __________________ If one does not attach himself to people and desire, never shall his heart be broken. But then, does he ever truly live? Life is just too damn short for if's and maybe's

Oct 8, 2009, 02:25 AM	#122
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Weston Ohio Posts: 7,449 Rep Power: 149	Re: Pax Audigy Software Suite Spring Edition 2009 Yes it's always good to uninstalled currect driver but you can keep your software. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" Fastest at as I seen at 2am in morning hehe.

Oct 8, 2009, 01:36 PM	#123
magwork DriverHeaven Junior Member Join Date: Oct 2009 Posts: 28 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 Hi, use your Pax pci audigy all os 1.2 driver in Win7 X64 an installed the software from Spring Suite. Now i have grayed-out switches for Bass and Treble in Surroundmixer. And EAX sais it didn't find the supported audio device. I own a Sb Audigy Gamer SB009. What can I do?

Oct 8, 2009, 01:56 PM	#124
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Weston Ohio Posts: 7,449 Rep Power: 149	Re: Pax Audigy Software Suite Spring Edition 2009 Used driver cleaner uninstalled then run driver cleaner then run iobit software fix up reg and defrag reg and reinstalled the driver you may have to formated. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" Fastest at as I seen at 2am in morning hehe.

Oct 8, 2009, 02:08 PM	#125
magwork DriverHeaven Junior Member Join Date: Oct 2009 Posts: 28 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 Sorry, don't take this personal. But i don't understand your instructions completely. First I have to unistall Software and driver. Then run a driver cleaner. "Run iobit software"<- what is iobit software ?? The run regcleaner. And at last install driver again. Is this procedure correct. Edit: I did do that procedure, I uninstalled drivers an software. Did run driver cleaner and "ccleaner" rebooted. Installed Software form Spring Suite, rebooted. And installed pax audigy 1.2 drivers. But same results: Music ok, but in surround mixer greyed-out regulators for bass, treble, that u hear, and so on. Only master volume and CD volume is available. Eax console crashes as described earlier. Last edited by magwork; Oct 8, 2009 at 03:45 PM.

Oct 12, 2009, 10:15 PM	#127
Master0fPuppets DriverHeaven Newbie Join Date: Oct 2009 Posts: 1 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 I'm attempting to get my Audigy 2ZS working in Win 7 Ultimate, and not having fun... seems CMSS won't work at all - the EAX Console tanks out when I try to use it, and I've tried all different drivers (XP/Vista/Win7) and software packages (original/xp/vista). I'm going to attempt your driver and software packs, and I'll update here to let you know how it works on Windows 7 Ultimate. (Yes, it's the full release version, btw)

Oct 22, 2009, 11:15 AM	#128
sda2 DriverHeaven Newbie Join Date: Oct 2009 Posts: 2 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 Heyho, I just downloaded your Audigy All-OS Driver 1.2 and this Spring Edition. I installed the driver for my Audigy 2 ZS and everything's fine now, awesome sound and my mic got fixed in Skype aswell. Now, I wanted to have the Creative software suite like on my god old XP SP3 and I installed software from Spring Edition 2k9. During the installation, no error occured and I was really happy everything seemed to be working, but EAX Console and this Equilizer still fail to start. And Surroundmixer only shows Volume Control to me No adjustable Bass and Treble. To change this, I must go into my Windows controlpanel for audio. Here's a little screenshot: Maybe you can help me to get those apps running on 7 64bit. Thanks, sda2

Oct 23, 2009, 03:30 AM	#129
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Weston Ohio Posts: 7,449 Rep Power: 149	Re: Pax Audigy Software Suite Spring Edition 2009 hmm Did you do full driver cleaner? and run reg cleaner before you run the suite. Suite goes first then drivers second. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" Fastest at as I seen at 2am in morning hehe.

Oct 23, 2009, 12:25 PM	#130
sda2 DriverHeaven Newbie Join Date: Oct 2009 Posts: 2 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 Ahh I think thats the reason.. I first did the drivers then suite. Thanks, I will give it a try

Oct 23, 2009, 01:39 PM	#131
magwork DriverHeaven Junior Member Join Date: Oct 2009 Posts: 28 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 Hi, i have exactly the same problem as sda2. I'm on Win7 x64 but with an "Audigy 1 Player" SB009. I did a complete uninstall of Software and drivers. Did run two driver cleaners and "ccleaner" for software clean-up. Then restarted win7 and installed software first. Afterwards I installed the All-OS 1.2 driver. But I got the same problems again. In surroundmixer there is only mastervolume, volume and cd-audio, as shown in sda2's picture. And equalizer and EAX have the same error messages as shown in sda2's screenshot.

Oct 24, 2009, 10:14 AM	#132
evrycard HardwareHeaven Newbie Join Date: Oct 2009 Posts: 10 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 I have the same problem as magwork and sad2. Using: Audigy 4 Pro on windows 7 x86 On windows 7 x64, I have problem installing the application Spring edition. Below is the error: "CTDVDA32.DLL This DLL can only be loaded in the native 32-but environnement" then "RegSvr32 fails to register c:\windows\system32\CTDvda32.dll" Last edited by evrycard; Oct 24, 2009 at 10:33 AM. Reason: adding error

Oct 24, 2009, 10:58 PM	#134
Aymen DriverHeaven Newbie Join Date: Oct 2009 Posts: 1 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 Thank u so much ! u made my day !!

Oct 25, 2009, 12:55 AM	#135
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Weston Ohio Posts: 7,449 Rep Power: 149	Re: Pax Audigy Software Suite Spring Edition 2009 Ya dvd from creative doesn't work with 64 bit unless they updated at there web site. Don't worry I role new sets drivers with more updated tweak settings soon. It may have wait to Nov I'm still searching for good home to live in __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" Fastest at as I seen at 2am in morning hehe.

Oct 26, 2009, 09:33 PM	#137
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Weston Ohio Posts: 7,449 Rep Power: 149	Re: Pax Audigy Software Suite Spring Edition 2009 I release audigy set soon . __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" Fastest at as I seen at 2am in morning hehe.

Oct 27, 2009, 01:26 PM	#138
boba23 DriverHeaven Junior Member Join Date: Dec 2003 Posts: 29 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 Hey Robert, downloaded your software suite, I am on Win7 32bit with an Xtreme Music. Should I install software only and then the latest driver? Or driver first, and then software? thanks boba

Dec 22, 2009, 06:06 AM	#139
nofate DriverHeaven Newbie Join Date: Dec 2009 Posts: 6 Rep Power: 0	Re: Pax Audigy Software Suite Spring Edition 2009 hi Rob.. I'm using Creative XFI Surround 5.1 usb,everything's okie except there's no DTS and Dolby Digital...On Audio Console panel there is not DTS/Dolby icon also...Could you please help me???What should i do? I'm looking forward to hearing from you soon, Thanks in advance,bro... PS:I'm using Windows 7 Pro

Dec 22, 2009, 06:17 AM	#140
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Weston Ohio Posts: 7,449 Rep Power: 149	Re: Pax Audigy Software Suite Spring Edition 2009 Hi nofate could u repost in right therad rhanks I'd know about usb one but your welcome try my drivers out __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" Fastest at as I seen at 2am in morning hehe.